Reference RT82 High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers 

Ortofon OM10 Cartridge - 150W Class D Amplifier and Bluetooth

Rating:
100%
$901.99 CAD

Color: Piano Black

color-swatchcolor-swatchcolor-swatchcolor-swatchcolor-swatchcolor-swatch

Model:

Place Order
Learn More
Clicking this button will redirect you to the official website to make the purchase
Reference RT82 High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers 
Reference RT82 High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers 
EXHILARATING SOUND PERFORMANCE

EXHILARATING SOUND PERFORMANCE

Immerse yourself in the ultimate listening experience by pairing a fully loaded high fidelity turntable with endlessly versatile, room-filling 150-watt powered floorstanding speakers

PREMIUM TURNTABLE COMPONENTS

PREMIUM TURNTABLE COMPONENTS

Packed with high performance components including an Ortofon OM10 Cartridge, servo motor, high mass MDF wood plinth, metal platter, 3-point vibration isolation feet, S-type precision tonearm to provide a pure analog sound

RAW POWER & NATURAL PLAYBACK

RAW POWER & NATURAL PLAYBACK

These active speakers produce a full range of sound with breathtaking imaging, refined detail, exceptionally accurate midrange and deep bass for an immersive audio experience

UNCOMPROMISED PHONO AMPLIFICATION & EQUALIZATIONS

UNCOMPROMISED PHONO AMPLIFICATION & EQUALIZATION

Precisely converts the turntable phono signal to line level, featuring an ultra high-accuracy frequency response to faithfully reproduce the original recording to the RIAA standard

SIMPLE AUDIO SETUP

SIMPLE AUDIO SETUP

Easily switch between your vinyl records and streaming your favorite music apps through Bluetooth with this simple plug and play setup – no separate amp required

Place Order
Learn More
Clicking this button will redirect you to the official website to make the purchase

Specifications

Ai81 Elite Powered Floorstanding Tower Speakers

Specifications
Speaker Type Floorstanding
Speaker Configuration 2 Way – 3 Driver Powered Floorstanding Speaker System with Integrated Amplifier (Pair – 1x Active, 1x Passive)
Enclosure Tuned Down-Firing Port Bass Reflex Design Dampened
Tweeter 1 inch Silk Soft Dome Neodymium Ferrofluid Cooled
Woofer Dual 6.5 inch Woven, Glass Fiber Composite Drivers with Butyl Rubber Surrounds
Amplifier Power Class D 150 Watts Continuous Average Output (2x 75 Watts RMS)
Frequency Response 30Hz-20kHz (DSP Enhanced) 
Crossover Frequency 2200Hz Phase Coherent 12dB/Oct – PCB Mounted Circuitry
Bluetooth Yes; Bluetooth 5.0
Audio Inputs 2x RCA L/R, Bluetooth, & Digital Optical TOSLINK
Internal Lead Wire 18 gauge Internal Lead Wire to Reduce Signal Degradation
Subwoofer Output Yes, 80 Hz Low-pass Frequency Cutoff 
Phono Preamp No
Internal DAC Yes
WiFi Casting Pairs via Bluetooth with Google Home, Amazon Echo, and AppleTV (Ai81 is not a WiFi speaker)
Total Harmonic Distortion (THD) <0.1% (THD+ N)
Power Input 100-240V AC (50Hz/60Hz)
Dimensions 37.8 x 8.50 x 10.24 inches / 96 x 21.6 x 26 cm (HxWxD) feet installed
Weight Active Speaker: 30.61 lbs (13.88 kg)
Passive Speaker: 29.02 lbs (13.16 kg)
Fluance Speaker Size Comparison Chart

Click to Expand

Fluance Size Comparison Chart

Certifications cTUVus+CB, ICES, FCC Certified
UPC 61783275443
What's Included
  • Ai81 Powered Floorstanding Speakers (pair)
  • Remote Control
  • 2x AAA Batteries
  • 6ft Power Cable
  • 8ft 18 Gauge Speaker Wire
  • Quick Start Guide
  • Fluance Catalog
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Warranty

Ai81 Elite Powered Floorstanding Tower Speakers

Specifications
Speaker Type Floorstanding
Speaker Configuration 2 Way – 3 Driver Powered Floorstanding Speaker System with Integrated Amplifier (Pair – 1x Active, 1x Passive)
Enclosure Tuned Down-Firing Port Bass Reflex Design Dampened
Tweeter 1 inch Silk Soft Dome Neodymium Ferrofluid Cooled
Woofer Dual 6.5 inch Woven, Glass Fiber Composite Drivers with Butyl Rubber Surrounds
Amplifier Power Class D 150 Watts Continuous Average Output (2x 75 Watts RMS)
Frequency Response 30Hz-20kHz (DSP Enhanced) 
Crossover Frequency 2200Hz Phase Coherent 12dB/Oct – PCB Mounted Circuitry
Bluetooth Yes, Bluetooth 5.0
Audio Inputs 2x RCA L/R, Bluetooth, & Digital Optical TOSLINK
Internal Lead Wire 18 gauge Internal Lead Wire to Reduce Signal Degradation
Subwoofer Output Yes, 80 Hz Low-pass Frequency Cutoff 
Phono Preamp No
Internal DAC Yes
WiFi Casting Pairs via Bluetooth with Google Home, Amazon Echo, and AppleTV (Ai81 is not a WiFi speaker)
Total Harmonic Distortion (THD) <0.1% (THD+ N)
Power Input 100-240V AC (50Hz/60Hz)
Dimensions 37.8 x 8.50 x 10.24 inches / 96 x 21.6 x 26 cm (HxWxD) feet installed
Weight Active Speaker: 30.61 lbs (13.88 kg)
Passive Speaker: 29.02 lbs (13.16 kg)
Fluance Speaker Size Comparison Chart

Click to Expand

Fluance Size Comparison Chart

Certifications cTUVus+CB, ICES, FCC Certified
What's Included
  • Ai81 Powered Floorstanding Speakers (pair)
  • Remote Control
  • 1x CR2032 Batteries
  • 6ft Power Cable
  • 8ft 18 Gauge Speaker Wire
  • Quick Start Guide
  • Fluance Catalog
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Warranty

RT82 Reference High Fidelity Vinyl Turntable

Specifications
Cabinet Specifications
Cabinet Material MDF
Finish High Gloss Piano Black
Dust Cover Yes - Tinted
Turntable Specifications
Drive System Belt Drive
Motor DC Motor with Servo Controller Analyzes motor speed 500 times/sec
Motor Isolation Under-mounted 7-point silicone isolation with decoupling isolation ring
Speed 33 1/3 RPM, 45 RPM (78 RPM - No)
Speed Variation 0.13%
Wow and Flutter 0.07%
Signal-to-Noise Ratio (Weighted) 76 dB
Signal-to-Noise Ratio (Unweighted) 65 dB
Platter Aluminum
Diameter of Platter 12 inches (30 cm)
Weight of Platter 1.22 lbs (553 g)
Height of Platter 0.62 inches (16 mm)
Auto-Stop Yes
Turntable Mat Rubber
Tonearm Type Static Balanced, S-Type
Supported Cartridge Weight 0.18 – 0.25 oz (5.0 – 7.5 g)
Counterweight Yes – 3.60 oz (102 g) - Adjustable
Anti-skating Adjustment Yes – Adjustable
Pivot Bearing Yes
Cueing Lever Yes
Tonearm Material Aluminum
Tonearm Wire 36 AWG Litz Cable / 7 Strand
Effective Tonearm Mass 0.77 oz (21.78 g)
Overhang 0.76 inches (19.2 mm)
Effective Tonearm Length 8.82 inches (224 mm)
Headshell Mount H-4 Bayonet Mount
Cartridge Type Moving Magnet (MM)
Cartridge Model Ortofon OM 10
Replacement Stylus Stylus 10
Stylus 0.3 x 0.7 mil
Cantilever Aluminum
Mount Half-inch
Frequency Response 20 - 20,000 Hz (+3/-1 dB)
Frequency Range 20 - 22,000 Hz
Channel Separation 22 dB at 1 kHz
Channel Balance < 1.5 dB @ 1 kHz
Load Impedance/Capacitance 47k Ohms/200 - 500 pF
Output Voltage 4.0 mV
Cartridge Weight 0.18 oz (5 g)
Cartridge Height 0.71 inches (18 mm)
Recommended Tracking Force 0.05 oz (1.5 g)
Vertical Tracking Angle 20° (Non-Adjustable)
Rubber Belt Specifications
Rubber Belt Design Continuous loop (joint-less)
Width 0.17 inches (4.5 mm)
Length 36.02 inches (915 mm)
Thickness 0.02 inches (0.6 mm)
Connector RCA (Gold-plated)
Phono Preamp No - Separate Phono Preamp Required
Phono Output 4.0 mV
Ground Terminal Yes
Input 100 – 240 V AC (50/60 Hz)
Output 12 V / 500 mA
Consumption 1.5 W
Dimensions 6 (+/-0.5) x 16.5 x 14.25 inches / 14.6 (+/-1.25) x 41.9 x 36.2 cm (HxWxD)
Unit Weight 14.99 lb (6.8 kg)
Operating Temperature 41°F to 95°F (5°C to 35°C)
Wireless Playback No (Requires Bluetooth or WiFi transmitter connected via RCA connection to transmit audio wirelessly)
Fluance Speaker Size Comparison Chart

Click to Expand

Fluance Size Comparison Chart

Certifications FCC Certified, RoHS, CUL/UL
UPC 061783268377
What's Included

RT82 Reference Turntable Line Out

Click to Expand

RT82 Reference Turntable Line Out


  • RT82T Turntable
  • Dust Cover + Hinges
  • Bubble Level
  • Headshell with Ortofon OM 10 Cartridge
  • Counterweight (CW02)
  • Metal Platter with Belt
  • Rubber Platter Mat
  • 5ft 100 - 240 V (50/60Hz) AC Power Adapter
  • 3ft 90pF RCA Cable (CA03)
  • 3ft Ground Wire (GW03)
  • 45 Adaptor
  • Motor Pulley Cap
  • Cotton Gloves
  • User Manual
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Direct Warranty
  • Premium Grade Low Capacitance RCA Audio Cable (3 Feet)

    Specifications
    Compatible With RT80, RT81, RT82, RT83, RT84, RT85, PA10
    Length 3'
    UPC 61783269053
    What's Included
  • 3 Foot Premium Grade RCA Audio Cable
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Warranty
  • PA10 High Fidelity Phono Preamp

    Specifications
    Audio Specifications
    Audio Circuit Type Passively Equalized RIAA
    Compatible Stylus MM
    Gain 38 dB
    Phono Input Sensitivity 30 mV
    Total Harmonic Distortion (THD) 0.00%
    RIAA Equalization Accuracy (deviation) 20 Hz - 20 kHz +/- 0.5 dB
    Signal/Noise (S/N) Ratio > 90 dB
    Crosstalk > -86 dB
    Input Impedance 47 kohm
    Input Load Capacitance 100 pF
    Output Impedance 100 ohm
    Output Voltage 2.2 V
    Maximum Input @ 1 kHz 100 mV
    Maximum Phono Stage Output 125 mV
    High Pass Filter Cutoff 20 Hz
    Dynamic Range > 85 dB
    Input/Output Specifications
    Input RCA L/R (Gold Plated)
    Output RCA L/R (Gold Plated)
    Ground Terminal Yes
    Cabinet Specifications
    Cabinet Material MDF
    Finish PVC Wood
    Color Black
    Power Specification
    Power Input 110 V - 240 V ~ 50/60 Hz 0.5 A
    Power Adapter Output 24 V, 500 mA
    Power Consumption 0.4 W
    General Specifications
    Dimensions 4(L) x 2.25(H) x 3.6(D) inches (101.5 x 57.1 x 91.5 mm)
    Weight 11.5 oz (325 g)
    Operating Temperature -5°C - 45°C
    Noise Floor (Unweighted) < 220 uV
    Compatible With Fluance RT80, RT81, RT82, RT83, RT84, and RT85 turntables as well as any turntables that are equipped with a Moving Magnet cartridge
    UPC 061783269794
    What's Included

    PA10 Preamplifier Lineout

    Click to Expand

  • PA10 Unit
  • Power Adapter
  • User Manual
  • Fluance Catalog
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Warranty
  • What's Included

    Write Your Own Review
    You're reviewing:Reference RT82 High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers 
    Your Rating

    Frequently Asked Questions

    Can I connect Ai81 to a amplifier or A/V receiver?


    No, the Ai81 Powered Floorstanding speakers have their own internal power source and cannot be connected to an amplifier or A/V Receiver for surround sound use.

    Do I need a preamp to connect a turntable to Ai81?


    You will need a preamp to boost the turntable signal to a listenable level. Some turntables such as our RT80 and RT81 have built-in preamps while others do not.

    Can Ai81 be connected to a turntable?


    Yes! You can connect your turntable to the Ai81 speakers using either RCA input. The speakers do not have a built-in preamp. You will need to confirm if your turntable will require an external preamp.

    What Bluetooth Codec does Ai81 use?


    The Fluance Ai81 speakers use the AAC codec.

    What connections does Ai81 have?


    2x RCA L/R Bluetooth 5.0 Digital Optical TOSLINK

    Helpful Guides & Videos

    © 2024 Shoptronics All Rights Reserved.