RT81 Elite High Fidelity Vinyl Turntable with Ai81 Elite Powered 2-Way Floorstanding Tower Speakers
$734.99 USD
Support
RT81 Elite High Fidelity Vinyl Turntable with Ai81 Elite Powered 2-Way Floorstanding Tower Speakers
EXHILARATING SOUND PERFORMANCE
Immerse yourself in the ultimate listening experience by pairing a fully loaded high fidelity turntable with endlessly versatile, room-filling 150-watt powered floorstanding speakers
PREMIUM TURNTABLE COMPONENTS
Packed with high performance components including an Audio Technica ATN95E diamond tipped stylus, rubber mat, S-type precision tonearm, Texas Instruments preamp, recreating the performance the way the artist intended
RAW POWER & NATURAL PLAYBACK
These active speakers deliver a captivating stereo soundstage with breathtaking imaging, refined detail and exceptionally accurate midrange for an immersive audio experience
METICULOUSLY ENGINEERED SPEAKER CABINETS
Expertly tuned, internally braced MDF wood cabinets produce a full range of sound and feature down-firing bass ports for deep and natural omni-directional bass
SIMPLE AUDIO SETUP
Easily switch between your vinyl records and streaming your favorite music apps through Bluetooth with this simple plug and play setup – no separate amp required
Overview
Specifications
RT81 Elite High Fidelity Vinyl Turntable
| Cabinet Specifications | ▼ |
|---|---|
| Cabinet Material | MDF |
| Finish | High Gloss Piano Black |
| Dust Cover | Yes - Tinted |
| Turntable Specifications | ▼ |
| Drive System | Belt Drive |
| Motor | DC Motor |
| Motor Isolation | Three Point Rubber Isolation |
| Speed | 33 1/3 RPM, 45 RPM (78 RPM - No) |
| Speed Variation | +/-1.00% - Speed Adjustment Guide |
| Wow and Flutter | 0.2% |
| Signal-to-Noise Ratio (Weighted) | 67dB or higher (A-weighted, 20kHz LPF) |
| Signal-to-Noise Ratio (Unweighted) | 60dB or higher (unweighted, 20kHz LPF) |
| Platter | Aluminum |
| Diameter of Platter | 12", 30cm |
| Weight of Platter | 1.22 lbs (553 g) |
| Height of Platter | 0.62 inches (16 mm) |
| Auto-Stop | Yes |
| Turntable Mat | Rubber |
| Tonearm Specifications | ▼ |
| Tonearm Type | Static Balanced, S-Type |
| Supported Cartridge Weight | 0.12 to 0.23 oz (3.5 to 6.5 g) |
| Counterweight | Yes – 3.53 oz (100 g) - Adjustable |
| Anti-skating Adjustment | Yes |
| Pivot Bearing | Yes |
| Cueing Lever | Yes |
| Tonearm Material | Aluminum |
| Effective Tonearm Mass | 0.99 oz (28.2 g) |
| Overhang | 0.76 inches (19.2 mm) |
| Effective Tonearm Length | 8.82 inches (224 mm) |
| Headshell Mount | H-4 Bayonet Mount |
| Tonearm Height | 0.67 inches (17 mm) |
| Cartridge Specifications | ▼ |
| Cartridge Type | Dual Moving Magnet (MM) |
| Cartridge Model | Audio Technica: AT95E |
| Replacement Stylus | ATN95E |
| Stylus | 0.4 × 0.7mil Bonded Elliptical (Diamond) |
| Cantilever | Aluminum |
| Mount | Half inch |
| Frequency Response | 20-20,000Hz |
| Channel Separation | 20dB at 1kHz |
| Channel Balance | 2.0dB or less at 1kHz |
| Load Impedance/Capacitance | 47k Ohms/100pF |
| Output Voltage | 3.5mV (+/–3dB) |
| Cartridge Weight | 5.7g (+/- 0.5g) |
| Headshell Weight | 0.38 oz (10.7 g) |
| Cartridge Height | 0.67 inches (17 mm) |
| Recommended Tracking Force | 2.0g +/–0.5g |
| Vertical Tracking Angle | 20 degrees (Non-Adjustable) |
| Rubber Belt Specifications | ▼ |
| Rubber Belt Design | Continuous loop (joint-less) |
| Width | 0.17 inches (4.5 mm) |
| Length | 21.03 inches (534.07 mm) |
| Thickness | 0.02 inches (0.6 mm) |
| Output Specifications | ▼ |
| Connector | RCA (Gold-plated) |
| Preamp | Yes, PHONO/LINE Switchable |
| Phono Output | 3.5mV (+/–3dB) |
| Phono Bypass | Yes, all electronics bypassed when using external preamp |
| Line Output | 140mV (–17dBV) |
| Ground Terminal | Yes |
| Power Specification | ▼ |
| Input | 100V - 240V AC (50/60Hz) |
| Output | 12V / 500mA |
| Consumption | 1.5W |
| General Specifications | ▼ |
| Dimensions | 5.5 x 16.5 x 13.75 inches / 14.0 x 41.9 x 34.9 cm (HxWxD) |
| Certifications | FCC Certified, RoHS, CUL/UL |
| Unit Weight | 14.1 lb (6.4 kg) |
| Operating Temperature | 20°C |
| Wireless Playback | No (Requires Bluetooth or WiFi transmitter connected via RCA connection to transmit audio wirelessly) |
| Fluance Speaker Size Comparison Chart |
|
| UPC | 871363017123 |
| What's Included |
Ai81 Elite Powered Floorstanding Tower Speakers
| Speaker Configuration | 2 Way – 3 Driver Powered Floorstanding Speaker System with Integrated Amplifier (Pair – 1x Active, 1x Passive) |
|---|---|
| Bluetooth | Yes, Bluetooth 5.0 |
| Inputs | 2x RCA L/R, Bluetooth, & Digital Optical TOSLINK |
| Tweeter | 1 inch Silk Soft Dome Neodymium Ferrofluid Cooled |
| Woofer | Dual 6.5 inch Woven, Glass Fiber Composite Drivers with Butyl Rubber Surrounds |
| Amplifier Power | Class D 150 Watts Continuous Average Output (2x 75 Watts RMS) |
| Frequency Response | 30Hz-20kHz (DSP Enhanced) |
| Internal DAC | Yes |
| Internal Lead Wire | 18 gauge Internal Lead Wire to Reduce Signal Degradation |
| Power | Input: 100-240V AC (50Hz/60Hz) |
| Crossover Frequency | 2200Hz Phase Coherent 12dB/Oct – PCB Mounted Circuitry |
| Enclosure | Tuned Down-Firing Port Bass Reflex Design Dampened |
| Dimensions | 37.8 x 8.50 x 10.24 inches / 96 x 21.6 x 26 cm (HxWxD) feet installed |
| Speaker Weight | Active Speaker: 30.61 lbs (13.88 kg) Passive Speaker: 29.02 lbs (13.16 kg) |
| Speaker Type | Floorstanding |
| Phono Preamp | No |
| Certifications | cTUVus+CB, ICES, FCC Certified |
| Subwoofer Output | Yes, 80 Hz Low-pass Frequency Cutoff |
| Total Harmonic Distortion (THD) | <0.1% (THD+ N) |
| WiFi Casting | Pairs via Bluetooth with Google Home, Amazon Echo, and AppleTV (Ai81 is not a WiFi speaker) |
| Fluance Speaker Size Comparison Chart | |
| What's Included |
|
Ai81 Elite Powered Floorstanding Tower Speakers
| Speaker Configuration | 2 Way – 3 Driver Powered Floorstanding Speaker System with Integrated Amplifier (Pair – 1x Active, 1x Passive) |
|---|---|
| Bluetooth | Yes; Bluetooth 5.0 |
| Inputs | 2x RCA L/R, Bluetooth, & Digital Optical TOSLINK |
| Tweeter | 1 inch Silk Soft Dome Neodymium Ferrofluid Cooled |
| Woofer | Dual 6.5 inch Woven, Glass Fiber Composite Drivers with Butyl Rubber Surrounds |
| Amplifier Power | Class D 150 Watts Continuous Average Output (2x 75 Watts RMS) |
| Frequency Response | 30Hz-20kHz (DSP Enhanced) |
| Internal DAC | Yes |
| Internal Lead Wire | 18 gauge Internal Lead Wire to Reduce Signal Degradation |
| Power | Input: 100-240V AC (50Hz/60Hz) |
| Crossover Frequency | 2200Hz Phase Coherent 12dB/Oct – PCB Mounted Circuitry |
| Enclosure | Tuned Down-Firing Port Bass Reflex Design Dampened |
| Dimensions | 37.8 x 8.50 x 10.24 inches / 96 x 21.6 x 26 cm (HxWxD) feet installed |
| Speaker Weight | Active Speaker: 30.61 lbs (13.88 kg) Passive Speaker: 29.02 lbs (13.16 kg) |
| Speaker Type | Floorstanding |
| Phono Preamp | No |
| Certifications | cTUVus+CB, ICES, FCC Certified |
| Subwoofer Output | Yes, 80 Hz Low-pass Frequency Cutoff |
| Total Harmonic Distortion (THD) | <0.1% (THD+ N) |
| WiFi Casting | Pairs via Bluetooth with Google Home, Amazon Echo, and AppleTV (Ai81 is not a WiFi speaker) |
| Fluance Speaker Size Comparison Chart | |
| UPC | 061783275443 |
| What's Included |
|
Customer Reviews
-
Does not disappoint.
I was looking for something special for the wife this year. Did a lot of shopping around and landed on fluance. I had questions before making a decision about which set up was suitable, customer support responded quickly and helped me understand what I needed and why.
The speakers are amazing. We only have a small house but they are more than sufficient without a sub.
Record player and speakers have a quality finish and feel.
Wife absolutely loves it. Probably the best gift I've ever given. Makes our house a home. -
Very easy to set up and is high quality equipment. Sounded great out of the box. Can't wait to turn it up (of course after the 8-10 hrs)!!!!! Highly recommend!
Resources
Manual
Guides
Video
FAQs
Can I connect Ai81 to a amplifier or A/V receiver?
No, the Ai81 Powered Floorstanding speakers have their own internal power source and cannot be connected to an amplifier or A/V Receiver for surround sound use.
Do I need a preamp to connect a turntable to Ai81?
You will need a preamp to boost the turntable signal to a listenable level. Some turntables such as our RT80 and RT81 have built-in preamps while others do not.
Can Ai81 be connected to a turntable?
Yes! You can connect your turntable to the Ai81 speakers using either RCA input. The speakers do not have a built-in preamp. You will need to confirm if your turntable will require an external preamp.
What Bluetooth Codec does Ai81 use?
The Fluance Ai81 speakers use the AAC codec.
What connections does Ai81 have?
2x RCA L/R
Bluetooth 5.0
Digital Optical TOSLINK
Articles from our experts
You may also like...
-
Reference RT85N High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers
-
Reference RT85 High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers
-
RT80 Classic High Fidelity Vinyl Turntable with Ai81 Elite Powered 2-Way Floorstanding Tower Speakers
-
Reference RT82 High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers