Reference RT85N High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers 

Nagaoka MP-110 Cartridge, Acrylic Platter - 150W Class D Amplifier and Bluetooth

Rating:
100%
$1,101.99 USD

Color: White Bamboo

color-swatchcolor-swatchcolor-swatchcolor-swatchcolor-swatchcolor-swatch

Model:

Place Order
Learn More
Clicking this button will redirect you to the official website to make the purchase
Reference RT85N High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers 
Reference RT85N High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers 
EXHILARATING SOUND PERFORMANCE

EXHILARATING SOUND PERFORMANCE

Immerse yourself in the ultimate listening experience by pairing a fully loaded high fidelity turntable with endlessly versatile, room-filling 150-watt powered floorstanding speakers

PREMIUM TURNTABLE COMPONENTS

PREMIUM TURNTABLE COMPONENTS

Packed with high performance components including a Nagaoka MP-110 Cartridge, acrylic platter, servo motor, high mass MDF wood plinth, 3-point vibration isolation feet, S-type precision tonearm to provide a pure analog sound

RAW POWER & NATURAL PLAYBACK

RAW POWER & NATURAL PLAYBACK

These active speakers produce a full range of sound with breathtaking imaging, refined detail, exceptionally accurate midrange and deep bass for an immersive audio experience

UNCOMPROMISED PHONO AMPLIFICATION & EQUALIZATIONS

UNCOMPROMISED PHONO AMPLIFICATION & EQUALIZATION

Precisely converts the turntable phono signal to line level, featuring an ultra high-accuracy frequency response to faithfully reproduce the original recording to the RIAA standard

SIMPLE AUDIO SETUP

SIMPLE AUDIO SETUP

Easily switch between your vinyl records and streaming your favorite music apps through Bluetooth with this simple plug and play setup – no separate amp required

Place Order
Learn More
Clicking this button will redirect you to the official website to make the purchase

Specifications

Ai81 Elite Powered Floorstanding Tower Speakers

Specifications
Speaker Type Floorstanding
Speaker Configuration 2 Way – 3 Driver Powered Floorstanding Speaker System with Integrated Amplifier (Pair – 1x Active 1x Passive)
Enclosure Tuned Down-Firing Port Bass Reflex Design Dampened
Tweeter 1 inch Silk Soft Dome Neodymium Ferrofluid Cooled
Woofer Dual 6.5 inch Woven, Glass Fiber Composite Drivers with Butyl Rubber Surrounds
Amplifier Power Class D 150 Watts Continuous Average Output (2x 75 Watts RMS)
Frequency Response 30Hz-20kHz (DSP Enhanced) 
Crossover Frequency 2200Hz Phase Coherent 12dB/Oct – PCB Mounted Circuitry
Bluetooth Yes, Bluetooth 5.0
Audio Inputs 2x RCA L/R, Bluetooth, & Digital Optical TOSLINK
Internal Lead Wire 18 gauge Internal Lead Wire to Reduce Signal Degradation
Subwoofer Output Yes, 80 Hz Low-pass Frequency Cutoff
Phono Preamp No
Internal DAC Yes
WiFi Casting Pairs via Bluetooth with Google Home, Amazon Echo, and AppleTV (Ai81 is not a WiFi speaker)
Total Harmonic Distortion (THD) <0.1% (THD+ N)
Power Input 100-240V AC (50Hz/60Hz)
Dimensions 37.8 x 8.50 x 10.24 inches / 96 x 21.6 x 26 cm (HxWxD) feet installed
Weight Active Speaker: 30.61 lbs (13.88 kg)
Passive Speaker: 29.02 lbs (13.16 kg)
Fluance Speaker Size Comparison Chart

Click to Expand

Fluance Size Comparison Chart

Certifications cTUVus+CB, ICES, FCC Certified
UPC 61783275535
What's Included
  • Ai81 Powered Floorstanding Speakers (pair)
  • Remote Control
  • 2x AAA Batteries
  • 6ft Power Cable
  • 8ft 18 Gauge Speaker Wire
  • Quick Start Guide
  • Fluance Catalog
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Warranty

PA10 High Fidelity Phono Preamp

Specifications
Audio Specifications
Audio Circuit Type Passively Equalized RIAA
Compatible Stylus MM
Gain 38 dB
Phono Input Sensitivity 30 mV
Total Harmonic Distortion (THD) 0.00%
RIAA Equalization Accuracy (deviation) 20 Hz - 20 kHz +/- 0.5 dB
Signal/Noise (S/N) Ratio > 90 dB
Crosstalk > -86 dB
Input Impedance 47 kohm
Input Load Capacitance 100 pF
Output Impedance 100 ohm
Output Voltage 2.2 V
Maximum Input @ 1 kHz 100 mV
Maximum Phono Stage Output 125 mV
High Pass Filter Cutoff 20 Hz
Dynamic Range > 85 dB
Input/Output Specifications
Input RCA L/R (Gold Plated)
Output RCA L/R (Gold Plated)
Ground Terminal Yes
Cabinet Specifications
Cabinet Material MDF
Finish PVC Wood
Color Black
Power Specification
Power Input 110 V - 240 V ~ 50/60 Hz 0.5 A
Power Adapter Output 24 V, 500 mA
Power Consumption 0.4 W
General Specifications
Dimensions 4(L) x 2.25(H) x 3.6(D) inches (101.5 x 57.1 x 91.5 mm)
Weight 11.5 oz (325 g)
Operating Temperature -5°C - 45°C
Noise Floor (Unweighted) < 220 uV
Compatible With Fluance RT80, RT81, RT82, RT83, RT84, and RT85 turntables as well as any turntables that are equipped with a Moving Magnet cartridge
UPC 061783269794
What's Included

PA10 Preamplifier Lineout

Click to Expand

  • PA10 Unit
  • Power Adapter
  • User Manual
  • Fluance Catalog
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Warranty
  • RT85N Reference High Fidelity Vinyl Turntable

    Specifications
    Cabinet Specifications
    Cabinet Material MDF
    Finish High Gloss Piano White
    Dust Cover Yes - Tinted
    Turntable Specifications
    Drive System Belt Drive
    Motor DC Motor with Servo Controller Analyzes motor speed 500 times/sec
    Motor Isolation Under-mounted 7-point silicone isolation with decoupling isolation ring
    Speed 33 1/3 RPM, 45 RPM (78 RPM – No)
    Speed Variation 0.10%
    Wow and Flutter 0.07%
    Signal-to-Noise Ratio (Weighted) 68 dB
    Signal-to-Noise Ratio (Unweighted) 59 dB
    Platter Acrylic
    Diameter of Platter 12 inches (30 cm)
    Weight of Platter 3 lbs (1.56 kg)
    Height of Platter 0.62 inches (16 mm)
    Auto-Stop Yes
    Turntable Mat Not Required
    Tonearm Type Static Balanced, S-Type
    Supported Cartridge Weight 0.18 – 0.25 oz (5.0 – 7.5 g)
    Counterweight Yes – 3.60 oz (102 g) - Adjustable
    Anti-skating Adjustment Yes – Adjustable
    Pivot Bearing Yes
    Cueing Lever Yes
    Tonearm Material Aluminum
    Tonearm Wire 36 AWG Litz Cable / 7 Strand
    Effective Tonearm Mass 0.74 oz (21.1 g)
    Overhang 0.76 inches (19.2 mm)
    Effective Tonearm Length 8.82 inches (224 mm)
    Headshell Mount H-4 Bayonet Mount
    Cartridge Type Moving Magnet (MM)
    Cartridge Model Nagaoka: MP-110
    Replacement Stylus JN-P110
    Stylus 0.4 x 0.7 mil (Superfine polished elliptical bonded diamond)
    Cantilever Aluminum
    Mount Half-inch
    Frequency Response 20 - 20,000 Hz
    Channel Separation 23 dB at 1 kHz
    Channel Balance > 1.5 dB at 1 kHz
    Load Impedance/Capacitance 47k Ohms - 100pF
    Output Voltage 5.0 mV
    Cartridge Weight 0.23 oz (6.5g)
    Headshell Weight 0.35 oz (9g)
    Cartridge Height 0.73 inches (18.5 mm)
    Recommended Tracking Force 0.05 - 0.07 oz (1.5 - 2.0 g)
    Vertical Tracking Angle 31° (Non-Adjustable)
    Rubber Belt Specifications
    Rubber Belt Design Continuous loop (joint-less)
    Width 0.17 inches (4.5 mm)
    Length 36.02 inches (915 mm)
    Thickness 0.02 inches (0.6 mm)
    Connector RCA (Gold-plated)
    Phono Preamp No - Separate Phono Preamp Required
    Phono Output 5.0 mV
    Ground Terminal Yes
    Input 100 – 240 V AC (50/60 Hz)
    Output 12 V / 500 mA
    Consumption 1.5 W
    Dimensions 6 (+/-0.5) x 16.5 x 14.25 inches / 14.6 (+/-1.25) x 41.9 x 36.2 cm (HxWxD)
    Unit Weight 16.76 lb (7.6 kg)
    Operating Temperature 41°F to 95°F (5°C to 35°C)
    Wireless Playback No (Requires Bluetooth or WiFi transmitter connected via RCA connection to transmit audio wirelessly) 
    Fluance Speaker Size Comparison Chart

    Click to Expand

    Fluance Size Comparison Chart

    Certifications FCC Certified, RoHS, CUL/UL
    UPC 061783273739
    What's Included

    RT85N Reference Turntable Line Out

    Click to Expand

    RT85N Reference Turntable Line Out


  • RT85NWH Turntable
  • Dust Cover + Hinges
  • Bubble Level
  • Headshell with Nagaoka MP-110 Cartridge
  • Counterweight (CW02)
  • Acrylic Platter (AP03) with Belt (RB35)
  • 5ft 100 - 240V ~ 50/60Hz Power Adapter
  • 3 ft 90pF RCA Cable (CA03)
  • 3 ft Ground Wire (GW03)
  • 45 Adaptor
  • Motor Pulley Cap
  • Cotton Gloves
  • User Manual
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Direct Warranty
  • Premium Grade Low Capacitance RCA Audio Cable (3 Feet)

    Specifications
    Compatible With RT80, RT81, RT82, RT83, RT84, RT85, PA10
    Length 3'
    UPC 61783269053
    What's Included
  • 3 Foot Premium Grade RCA Audio Cable
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Warranty
  • Ai81 Elite Powered Floorstanding Tower Speakers

    Specifications
    Speaker Type Floorstanding
    Speaker Configuration 2 Way – 3 Driver Powered Floorstanding Speaker System with Integrated Amplifier (Pair – 1x Active 1x Passive)
    Enclosure Tuned Down-Firing Port Bass Reflex Design Dampened
    Tweeter 1 inch Silk Soft Dome Neodymium Ferrofluid Cooled
    Woofer Dual 6.5 inch Woven, Glass Fiber Composite Drivers with Butyl Rubber Surrounds
    Amplifier Power Class D 150 Watts Continuous Average Output (2x 75 Watts RMS)
    Frequency Response 30Hz-20kHz (DSP Enhanced) 
    Crossover Frequency 2200Hz Phase Coherent 12dB/Oct – PCB Mounted Circuitry
    Bluetooth Yes; Bluetooth 5.0
    Audio Inputs 2x RCA L/R, Bluetooth, & Digital Optical TOSLINK
    Internal Lead Wire 18 gauge Internal Lead Wire to Reduce Signal Degradation
    Subwoofer Output es, 80 Hz Low-pass Frequency Cutoff 
    Phono Preamp No
    Internal DAC Yes
    WiFi Casting Pairs via Bluetooth with Google Home, Amazon Echo, and AppleTV (Ai81 is not a WiFi speaker)
    Total Harmonic Distortion (THD) <0.1% (THD+ N)
    Power Input 100-240V AC (50Hz/60Hz)
    Dimensions 37.8 x 8.50 x 10.24 inches / 96 x 21.6 x 26 cm (HxWxD) feet installed
    Weight Active Speaker: 30.61 lbs (13.88 kg)
    Passive Speaker: 29.02 lbs (13.16 kg)
    Fluance Speaker Size Comparison Chart

    Click to Expand

    Fluance Size Comparison Chart

    Certifications cTUVus+CB, ICES, FCC Certified
    UPC 61783275559
    What's Included
    • Ai81 Powered Floorstanding Speakers (pair)
    • Remote Control
    • 1x CR2032 Batteries
    • 6ft Power Cable
    • 8ft 18 Gauge Speaker Wire
    • Quick Start Guide
    • Fluance Catalog
    • Lifetime Customer Support
    • 2 Year Manufacturer’s Warranty

    What's Included

    Write Your Own Review
    You're reviewing:Reference RT85N High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai81 Elite Powered 2-Way Floorstanding Tower Speakers 
    Your Rating

    Guides

    Take a comprehensive look at the set up, function, and maintenance of your product. The product manual details all of its specifications and how to care for your product.

    Frequently Asked Questions

    Can I connect Ai81 to a amplifier or A/V receiver?


    No, the Ai81 Powered Floorstanding speakers have their own internal power source and cannot be connected to an amplifier or A/V Receiver for surround sound use.

    Do I need a preamp to connect a turntable to Ai81?


    You will need a preamp to boost the turntable signal to a listenable level. Some turntables such as our RT80 and RT81 have built-in preamps while others do not.

    Can Ai81 be connected to a turntable?


    Yes! You can connect your turntable to the Ai81 speakers using either RCA input. The speakers do not have a built-in preamp. You will need to confirm if your turntable will require an external preamp.

    What Bluetooth Codec does Ai81 use?


    The Fluance Ai81 speakers use the AAC codec.

    What connections does Ai81 have?


    2x RCA L/R Bluetooth 5.0 Digital Optical TOSLINK

    Helpful Guides & Videos

    © 2024 Shoptronics All Rights Reserved.