
RT80 Classic High Fidelity Vinyl Turntable with Ai61 Powered 6.5” Bookshelf Speakers


UNPARALLELED PERFORMANCE
With an integrated 120W amplifier, these active speakers deliver a true stereo sound with refined detail and powerful room-filling stereo sound that elevates your musical experience

PREMIUM TURNTABLE COMPONENTS
Packed with high performance components including an Audio Technica AT91 conical stylus, felt mat, S-type precision tone arm, Texas Instruments preamp, recreating the performance the way the artist intended

POWERFUL SPEAKERS
Light and rigid 6.5-inch woven glass fiber drivers produce detailed midrange frequencies and clean undistorted bass with stunning acoustic accuracy

PRECISION CRAFTED WOOD CABINETS
Enjoy warm sound from the internally braced MDF wood cabinets, meticulously engineered to remove unwanted resonances with a rear bass port for full and natural bass

SIMPLE AUDIO SETUP
Easily switch between your vinyl records and streaming your favorite music apps through Bluetooth with this simple plug and play setup – no separate amp required
Overview
Specifications
Ai61 Powered 6.5" Stereo Bookshelf Speakers

Speaker Configuration | 2 Way – 2 Driver Powered Bookshelf Speaker System with Integrated Amplifier (Pair – 1x Active, 1x Passive) |
---|---|
Bluetooth | Yes, Bluetooth 5.0 |
Inputs | RCA L/R, Bluetooth, & Digital Optical TOSLINK, USB Type-C |
Tweeter | 1 inch Silk Soft Dome Neodymium Ferrofluid Cooled |
Woofer | 6.5 inch Woven, Glass Fiber Composite Drivers with Butyl Rubber Surrounds |
Amplifier Power | Class D 120 Watts Continuous Average Output (2x 60 watts RMS) |
Frequency Response | 32Hz-20kHz (DSP Enhanced) |
Internal DAC | Yes |
Internal Lead Wire | 18 gauge Internal Lead Wire to Reduce Signal Degradation |
Power | Input: 100-240V AC (50/60Hz) |
Crossover Frequency | 2800Hz Phase Coherent 12dB/Oct – PCB Mounted Circuitry |
Enclosure | Tuned Rear Port Bass Reflex Design Dampened |
Dimensions | 13.1 x 7.8 x 9.2 inches / 33.3 x 19.8 x 23.4 cm (HxWxD) |
Speaker Weight | Active Speaker: 14.03 lbs (6.36 kg) Passive Speaker: 13.14 lbs (5.96 kg) |
Speaker Type | Bookshelf |
Phono Preamp | No |
Certifications | cTUVus+CB, ICES, FCC Certified |
Subwoofer Output | Yes, 80 Hz Low-pass Frequency Cutoff |
Total Harmonic Distortion (THD) | <0.3% (THD+ N 1%) |
WiFi Casting | Pairs via Bluetooth with Google Home, Amazon Echo, and AppleTV (Ai61 is not a WiFi speaker) |
Fluance Speaker Size Comparison Chart | |
UPC | 061783272756 |
What's Included | Ai61 SPEAKER LINE OUT
|
RT80 High Fidelity Vinyl Turntable Record Player

Cabinet Specifications | ▼ |
---|---|
Cabinet Material | MDF |
Finish | Painted High Gloss (Black) |
Dust Cover | Yes - Tinted |
Turntable Specifications | ▼ |
Drive System | Belt Drive |
Motor | DC Motor |
Motor Isolation | Three Point Rubber Isolation |
Speed | 33 1/3 RPM, 45 RPM |
Speed Variation | +/-1.00% - Speed Adjustment Guide |
Wow and Flutter | 0.2% |
Signal-to-Noise Ratio (Weighted) | 67dB or higher (A-weighted, 20kHz LPF) |
Signal-to-Noise Ratio (Unweighted) | 60dB or higher (unweighted, 20kHz LPF) |
Platter | Aluminum |
Diameter of Platter | 12", 30cm |
Weight of Platter | 1.22 lbs (553 g) |
Height of Platter | 0.62 inches (16 mm) |
Auto-Stop | Yes |
Turntable Mat | Felt |
Tonearm Specifications | ▼ |
Tonearm Type | Static Balanced, S-Type |
Supported Cartridge Weight | 3.5 to 6.5g |
Counterweight | Yes – 3.53 oz (100 g) - Adjustable |
Anti-skating Adjustment | Yes |
Pivot Bearing | Yes |
Cueing Lever | Yes |
Tonearm Material | Aluminum |
Tonearm Wire | 36 AWG Litz Cable / 7 Strand |
Effective Tonearm Mass | 28.2 grams |
Overhang | 19.2mm |
Effective Tonearm Length | 224mm |
Headshell Mount | H-4 Bayonet Mount |
Tonearm Height | 17mm |
Cartridge Specifications | ▼ |
Cartridge Type | Moving Magnet (MM) |
Cartridge Model | Audio Technica: AT91 |
Replacement Stylus | ATN91 |
Stylus | 0.6mil Bonded Conical (Diamond) |
Cantilever | Carbon Fiber |
Mount | Half inch |
Frequency Response | 20-20,000Hz |
Channel Separation | 18dB at 1kHz |
Channel Balance | 2.5dB or less at 1kHz |
Load Impedance/Capacitance | 47k Ohms/100pF |
Output Voltage | 2.5mV +/–3dB |
Cartridge Weight | 5.0g (+/- 0.5g) |
Headshell Weight | 10g |
Cartridge Height | 0.67 inches (17 mm) |
Recommended Tracking Force | 2.0g (+/–0.5g) |
Vertical Tracking Angle | 20 degrees |
Rubber Belt Specifications | ▼ |
Rubber Belt Design | Continuous loop (joint-less) |
Width | 4.5mm |
Length | 534.07mm |
Thickness | 0.6mm |
Output Specifications | ▼ |
Connector | RCA (Gold-plated) |
Preamp | Yes, PHONO/LINE Switchable |
Phono Output | 2.5mV +/–3dB |
Phono Bypass | Yes, all electronics bypassed when using external preamp |
Line Output | 140mV (–17dBV) |
Ground Terminal | Yes |
Power Specification | ▼ |
Input | 100V - 240V AC (50/60Hz) |
Output | 12V / 500mA |
Consumption | 1.5W |
General Specifications | ▼ |
Dimensions | 16.5” x 5.5” x 13.75” |
Certifications | FCC Certified, RoHS, CUL/UL |
Unit Weight | 4.5 kg (9.9 lb) |
Operating Temperature | 20°C |
Wireless Playback | No (Requires Bluetooth or WiFi transmitter connected via RCA connection to transmit audio wirelessly) |
Fluance Speaker Size Comparison Chart | |
UPC | 061783258279 |
What's Included |
Customer Reviews
Resources
Manual
Guides
Video
FAQs
The Ai41 speakers are powered and the RT80 Turntable includes an internal preamp so no additional equipment is required!
The tonearm of the RT80 and RT81 model turntables is compatible with cartridges from 3.5 grams to 6.5 grams in weight. For a video walkthrough, click the link below.
Articles from our experts
You may also like...
-
Reference RT85 High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai61 Powered 6.5” Stereo Bookshelf Speakers
-
Reference RT82 High Fidelity Vinyl Turntable with PA10 Phono Preamp and Ai61 Powered 6.5” Bookshelf Speakers
-
RT81 Elite High Fidelity Vinyl Turntable with Ai61 Powered 6.5” Bookshelf Speakers