Elite Series Bipolar Surround Sound Satellite Speakers
The Fluance SXBP2 Bipolar Surround Sound Speakers offer an energetic and enticing performance with superior components that enhance the cinephile experience. From every high speed locomotive to the ferocious jet plane flight, these bipolar speakers will reinforce the movie theater experience you dream about.
Bipolar Surround Sound Design
The unique configuration of the bipolar speakers creates a 3D soundstage. This is achieved by having two complete full-range speaker systems on opposing sides of the cabinet. The results are widespread, enveloping surround sound throughout your room. The SXBP2 are designed for placement beside or behind the listeners for an extremely convincing 5.1/6.1/7.1 surround ambiance.
The enveloping sound design of the SXBP2s will have your heart pumping and your head rotating. The neodymium tweeters of the Classic Series bipolar speakers increase the enjoyment from your favorite cinematic blockbusters. You will feel every spine-tingling scream and rapid stampede from the SXBP2 bipolar speakers.
Richness in the Middle
Experience the high definition sound effects Hollywood intended you to hear with the SXBP2 Bipolar Surround Sound Speakers. The dual four-inch midrange drivers enhance cinema quality home theater by replicating the soundstage, tones and notes you crave from your favorite films and concerts.
Made for You
The SXBP2s are made with a trapezoidal configuration, the perfect shape to increase home theater sound. Made with engineered MDF wood cabinetry for reduced resonance, the SXBP2 bipolar speakers provide superb, rich sound performances at every volume level. The black ash wood finish match perfectly with the Classic Series, and is your ticket to an engaging, thrilling in-house movie theater experience.
|Speaker Configuration||2 Way - 4 Driver Bipolar Surround Speakers|
|Tweeter||Dual 1 inch Neodymium Balanced Dome Ferrofluid Cooled|
|Woofer||Dual 4 inch Polymer Treated with Butyl Rubber Surrounds|
|Power Handling||20 - 100 Watts RMS|
|Frequency Response||130Hz - 20KHz|
|Sensitivity||88dB @ 2.83V / 1m|
|Crossover Frequency||4000 Hz Phase Coherent - PCB Mounted Circuitry|
|Enclosure||Acoustic Suspension Design|
|Dimensions||10.2 X 11.0 X 5.5 inches|
|Speaker Weight||6.8 pounds/speaker|
|DOLBY ATMOS||Ideal for use as surround sound speakers in a Dolby Atmos™ Surround Sound System|
|Frequency Response Graph||
Click to Expand
|Fluance Speaker Size Comparison Chart|
initially purchased to use as my back speakers but now using these speakers as my surround speakers. Sound is great and has really enhanced my surround sound system.
Order was smooth and delivery was seamless. Setup was extremely easy (I recommend using a piece of paper, placing it against the keyholes, and drawing a template to use when drilling holes in your wall) and the speaker was stable. It sounded very good as well BUT my space and the required speaker location did not allow for the bipolar sound to be properly heard (it sounded no better than a direct firing speaker). That's not the fault of the unit - that's placement. When I moved it to where I would have preferred it be located in a perfect world, it sounded truly immersive! But the room's layout would not allow permanent positioning there. If you have a home theater room, by all means try this out! You won't be disappointed. Also, Fluance stands by their products and the risk free trial is amazing. 5 STARS!
Purchased these for center surrounds. They sound great. Terrific range and presence.
These are great rear speakers. I have them set up in a 7.1 system and the difference over my Bose Acoustimass speakers is unbelievable. Would absolutely buy these again.