RT81+ Elite High Fidelity Vinyl Turntable
Record Player with AT-VM95E Cartridge, Anti-Resonant Platter, Acrylic Mat, Phono Preamp, Wood Plinth, Adjustable Isolation Feet
Color: Natural Walnut
Model:
PURE ANALOG LISTENING EXPERIENCE
Premium components allow this high-fidelity belt driven turntable to recreate the performance the way the artist intended
SUPERIOR VIBRATION ISOLATION
Three adjustable isolation feet, an acrylic mat with similar resonant frequency to vinyl, and a dampened aluminum anti-resonant platter, resulting in improved frequency response, enhanced imaging, and greater signal clarity
HIGH PERFORMANCE CARTRIDGE
The next generation Audio Technica VM95E, featuring a diamond elliptical stylus, VM series upgradability, and greater frequency response, is mounted on a removable headshell for easier cartridge swapping
HIGH MASS ENGINEERED PLINTH
The gorgeously finished cabinet is crafted from solid engineered (MDF) wood which results in superior isolation from unwanted vibrations
CAPTIVATING SIGNAL CLARITY
Featuring a built-in Texas Instruments phono preamp, gold-plated RCA connections, and a ground terminal that deliver warm, and true sound
Type
Rubber Mat
Preamp
Fidelity Vinyl Turntable
Specifications
Cabinet Specifications | ▼ |
---|---|
Cabinet Material | MDF |
Finish | High Gloss Walnut Real Wood Veneer |
Dust Cover | Yes - Tinted |
Turntable Specifications | ▼ |
Drive System | Belt Drive |
Motor | DC Motor |
Motor Isolation | Three Point Rubber Isolation |
Speed | 33 1/3 RPM, 45 RPM (78 RPM – No) |
Speed Variation | +/-1.00% |
Wow and Flutter | 0.2% |
Signal-to-Noise Ratio (Weighted) | 67dB or higher (A-weighted, 20kHz LPF) |
Signal-to-Noise Ratio (Unweighted) | 60dB or higher (unweighted, 20kHz LPF) |
Platter | Dampened Aluminum |
Diameter of Platter | 12", 30 cm |
Weight of Platter | 1.25 lbs (566 g) |
Height of Platter | 0.62 inches (16mm) |
Auto-Stop | Yes |
Turntable Mat | Acrylic |
Tonearm Specifications | ▼ |
Tonearm Type | Static Balanced, S-Type |
Supported Cartridge Weight | 0.12 to 0.23 oz (3.5 to 6.5 g) |
Counterweight | Yes – 3.53 oz (100 g) - Adjustable |
Anti-skating Adjustment | Yes |
Pivot Bearing | Yes |
Cueing Lever | Yes |
Tonearm Material | Aluminum |
Tonearm Wire | 36 AWG Litz Cable / 7 Strand |
Effective Tonearm Mass | 0.99 oz (28.2 g) |
Overhang | 0.76 inches (19.2 mm) |
Effective Tonearm Length | 8.82 inches (224 mm) |
Headshell Mount | H-4 Bayonet Mount |
Tonearm Height | 0.67 inches (17 mm) |
Cartridge Specifications | ▼ |
Cartridge Type | Dual Moving Magnet (MM) |
Cartridge Model | Audio Technica: AT-VM95E |
Replacement Stylus | Audio Technica-VMN95E |
Stylus | 0.3 x 0.7 mil Bonded Eliptical (Diamond) |
Cantilever | Aluminum |
Mount | Half-inch |
Frequency Response | 20 - 22,000 Hz |
Channel Separation | 20 dB at 1 kHz |
Channel Balance | 2.0 dB or less at 1 kHz |
Load Impedance/Capacitance | 47k Ohms - 100pF |
Output Voltage | 4.0 mV (+/-3dB) |
Cartridge Height | 0.68 inches (17.2 mm) |
Recommended Tracking Force | 2.0g (+/-0.2g) |
Vertical Tracking Angle | 23 degrees (Non-Adjustable) |
Rubber Belt Specifications | ▼ |
Rubber Belt Design | Continuous loop (joint-less) |
Width | 0.17 inches (4.5 mm) |
Length | 21.03 inches (534.07 mm) |
Thickness | 0.02 inches (0.6mm) |
Output Specifications | ▼ |
Connector | RCA (Gold-plated) |
Phono Preamp | Yes, PHONO/LINE Switchable |
Phono Output | 4.0mV (+/-3dB) |
Phono Bypass | Yes, all electronics bypassed when using external preamp |
Line Output | 140mV (-17dBV) |
Ground Terminal | Yes |
Power Specification | ▼ |
Input | 100 – 240 V AC (50/60 Hz) |
Output | 12V / 500mA |
Consumption | 1.5 W |
General Specifications | ▼ |
Dimensions | 6 (+/-0.5) x 16.5 x 14.25 inches / 14.6 (+/-1.25) x 41.9 x 36.2 cm (HxWxD) |
Unit Weight | 14.1 lb (6.4 kg) |
Operating Temperature | 20°C |
Wireless Playback | No (Requires Bluetooth or WiFi transmitter connected via RCA connection to transmit audio wirelessly) |
Certifications | FCC Certified, RoHS, CUL/UL |
UPC | 061783277119 |
What's Included |